HydroBloom A: Liquid Hydroponic Blooming Mix

Active Constituents:

Nitrogen 1.5% W/V

Phosphorous 4.5 % W/V

Potassium 11.2 % W/V

Main Features:

* A very effective mix of mineral nutrients and state-of-the-art organic chelates.

* Suitable for all growing media & hydroponic systems.

* Remarkably stable even in extreme climatic conditions.

* Capable of producing exceptionally rapid plant growth.

* Provides total availability of all nutrient requirements.

* Dual chelator - acid and alkaline.

* The fully chelated micro-nutrients are boosted to higher levels than other mixes.

* The concentrated formula provides high potency at low cost.

* Stunning results assured when used correctly.

* Manufactured in Australia.

INSTRUCTIONS:

Always use equal amounts of A and B. Never mix A and B in concentrated form.

Shake bottles before use.

To obtain a solution of 1,300 ppm (see below), add the required amount of Part A to water in your tank.  Repeat for Part B.  Then top up the tank to full volume.  The use of a pH meter and a conductivity meter is recommended to ensure the maintenance of correct pH and strength.

1,300 ppm (parts per million) is equal to

1.857 mS/cm, or about equal to a cF (Conductivity Factor) of 19.

This strength is suitable for most purposes.

In general a pH (acidity/alkalinity) of 6.0 - 6.5 should be aimed for.